RAMA Tarot TL200A Mini 200mm 4-Axis Quadcopter Frame Kit Oferta limitowana

Opis

RAMA mini Quadcopter Tarot TL200A Mini 200mm 4-Axis Frame Kit

UWAGA! W skład zestawu wchodzi sama carbonowa konstrukcja ramy bez osprzętu elekrycznego.

Do uruchomienia polecamy dokupić:

• kontroler CC3D lub inny mały
• 4 x regulator ZTW12A
• 4 x silnik ZMR 1804 2400KV
• 2 x komplet śmigieł
• pilot z odbiornikiem
• akumulator 11,1V 900mAh z ładowarką

Description:
Brand Name: Tarot
Item Name: 200mm mini 4-axis quadcopter frame kit
Item NO.: TL200A
Wheelbase : 200mm
Empty Rack Height / Assembly Height : 30mm / 65mm
Empty Frame Length / Assembly Length : 168mm / 185mm
Empty Frame Width / Assembly Width : 168mm / 168mm
Empty Weight : 50g

Features:
– Super lightweight,allows the camera,battery,ESC, image transmission and antenna to be plugged directly on the frame or soldered on the PCB board,much less wiring,easy to install.
– Using 1.6mm PCB integration board,all the electronics can be mounted directly in the mounting hole,reduce the fly line interference.
– Very reasonable light frame structure for super long battery life
– Flight test: Using the recommended electronic devices,and 15c/11.1v11000mah battery,can enjoy 9 min flight.

Recommended PartsSold In Our Store(Not Included):
– 600mw 5.8g mini image transmission TL300N
– Mini camera TL300M
– CC3D openpilot flight controller
– 5.8g image transmission antenna set TL300K
– 5 inch 3-leaf propeller TL300E
– Spider ESC 12A
– Brushless motor 1860-2280KV TL300H
– 11.1V 900mAh 25C Lipo battery
– 7 channel receiver

Note: Only a frame,not included any electronic device.
           The size of the battery should less than 70x32x20mm
 

Package Included:
1x Mainboard(167x167x1.5mm,34.7g)
1x Left-foot frame board(168×29.5×1.2mm,5.5g)
1x Right-foot frame board(168×29.5×1.2mm,5.5g)
1x Camera mounting board(26x21x1.5mm,0.9g)
2x 700mm servo cable(2.2g)
1 set x XT30 plug
1x Battery magic tape
1x Battery ribbon
1x Chinese-English manual